RC26R
MOBILE RAIL CUTTER
Application: The Mobile Rail Cutter, RC26R, was developed for the efficient and controlled demolition of rail and the scrap preparation of railway lines.
Carrier: Designed for carriers from 35,000 to 75,000 lbs.
Design Features: Rails can be cut into any desired length, such as blast furnace sizes.
To achieve optimal work efficiency, the Mobile Rail Cutter should be mounted on the dipper stick of an excavator. Optimal working efficiency is guaranteed by the high stress-resistant rotation system with a 180° swivel range. The rail cutter quickly and easily reaches every working location required by the job.
Specifications |
|
Approx. weight excluding mounting bracket |
2.600 kg / 5,720 lbs |
Length |
2.550 mm / 100.4 in |
Jaw depth |
205 mm / 8.07 in |
Cutter length |
182 mm / 7.17 in |
Jaw opening |
205 mm / 8.07 in |
Hydraulic cylinder recommended oil flow* |
250-350 l/min / 66.7-93.3 gpm |
Hydraulic cylinder max. working pressure |
350 bar / 4,550 psi |
Rotation recommended oil flow |
18-25 l/min / 4.8-6.7 gpm |
Rotation max. working pressure |
200 bar / 2,840 psi |
Rotation swivel |
180° |
Approx. excavator size (rail cutter mounted on dipper stick) |
16-26 t / 35,200-57,200 lbs |
| *Working cycle time in seconds: | |||
| Oil flow | Close |
Open |
Total |
| 250 l/min / 66.7 gpm | 4.1 |
2.1 |
6.2 |
| 300 l/min / 80.0 gpm | 3.5 |
1.8 |
5.3 |
| 350 l/min / 93.3 gpm | 3.0 |
1.5 |
4.5 |